CompTIA Server+ (SK0-005) — Free Practice Questions
10 free sample questions from a bank of 597, with the correct answers and explanations. No signup required — start practising right now.
1Which of the following is typical of software licensing in the cloud?
Per socket
Perpetual
Subscription-based
Site-based
Answer: C
The short version
C — Cloud licensing is typically subscription-based. Cloud software bills per user per month or per consumption unit with continuous updates. Per-socket, perpetual and site models belong to on-prem ownership.
Key concepts in this question
Subscription licensing: recurring fee for access plus updates, scaled up or down on demand.
Cloud alignment: matches elasticity and opex budgeting rather than capital purchase.
Per-socket and perpetual: tie cost to hardware or one-time buy with maintenance, not cloud agility.
Site-based: covers a location in bulk, opposite to per-identity cloud metering.
Why C is correct
Cloud services meter by active use and release features continuously, which needs a recurring entitlement model. Subscription provides that elastic billing and update path. Other models assume fixed hardware or permanent ownership that cloud avoids.
Why the others are wrong
A. Per socket prices physical CPU occupancy, not elastic cloud consumption.
B. Perpetual buys permanent rights once, contrary to pay-as-you-go cloud access.
D. Site-based covers geography in bulk rather than metered cloud identities.
SK0-005 exam tip
Cloud plus licensing in one stem always means subscription-based, never perpetual.
2A server administrator wants to run a performance monitor for optimal system utilization. Which of the following metrics can the administrator use for monitoring?
(Choose two.)
Memory
Page file
Services
Application
CPU
Heartbeat
Answer: A, E
The short version
AE — Memory plus CPU show system utilization. Available RAM and processor busy time directly reveal saturation for a performance monitor. Page file, services, apps and heartbeat are secondary or availability signals.
Key concepts in this question
Core utilization pair: CPU percent plus memory used versus free expose compute headroom.
Performance monitor goal: track optimal use and spot bottlenecks before users suffer.
Secondary metrics: page file hints at spill, services list state, heartbeat proves liveness only.
Choose-two pattern: pick the two resource gauges, skip status or file counters.
Why AE is correct
Optimal utilization means knowing whether compute or RAM constrains throughput. Memory plus CPU together show both dimensions on one screen. Other counters either derive from these or report health rather than load.
Why the others are wrong
B. Page file use reflects memory pressure indirectly, not primary utilization.
C. Services state shows running versus stopped, not load level.
D. Application identity names workload but does not gauge resource draw.
F. Heartbeat confirms alive, never how busy the system is.
SK0-005 exam tip
Performance utilization pair to memorize is Memory plus CPU, skip heartbeat.
3After configuring IP networking on a newly commissioned server, a server administrator installs a straight-through network cable from the patch panel to the
switch. The administrator then returns to the server to test network connectivity using the ping command. The partial output of the ping and ipconfig
commands are displayed below:
The administrator returns to the switch and notices an amber link light on the port where the server is connected. Which of the following is the MOST likely reason
for the lack of network connectivity?
Network port security
An improper VLAN configuration
A misconfigured DHCP server
A misconfigured NIC on the server
Answer: D
The short version
D — Misconfigured NIC on the server blocks link. A straight-through cable to the switch with amber link plus failed ping after IP setup points to speed, duplex or driver mismatch. Port security, VLAN and DHCP would show different symptoms.
Key concepts in this question
Amber link clue: physical negotiation failed or error-disabled, not simply no address.
New server setup: fresh NIC may default to wrong speed or duplex versus switch port.
Ping plus ipconfig context: IP looks set yet no frames flow, implicating L1 or L2 on the host.
Alternative causes: security shutdown, VLAN prune or DHCP scope each leave distinct logs.
Why D is correct
The admin set IP then used correct cabling, yet the switch shows amber and ping fails. A NIC set to wrong speed, duplex or disabled state explains link failure with local config present. Other causes would allow link green or give address errors instead.
Why the others are wrong
A. Port security shutdown usually logs violation and disables fully, not amber negotiation.
B. Wrong VLAN still links green while failing higher-layer reachability.
C. DHCP misconfig affects address assignment, not link light after static setup.
SK0-005 exam tip
Amber link after correct cable plus static IP means check server NIC speed duplex first.
4A user cannot save large files to a directory on a Linux server that was accepting smaller files a few minutes ago. Which of the following commands should a
technician use to identify the issue?
pvdisplay
mount
df -h
fdisk -l
Answer: C
The short version
C — Run df minus h to see full filesystem. Large saves failing after small ones succeeded signals no space left on the Linux volume. Human-readable disk free shows use percent per mount for the target directory.
Key concepts in this question
Symptom pattern: small writes pass then large writes fail as the volume fills to capacity.
Df minus h role: reports size, used, available and mount for every filesystem in readable units.
Inode versus block check: df also reveals inode exhaustion that blocks writes despite free blocks.
Pvdisplay mount fdisk: show physical volumes, mount table or partition layout, not free space.
Linux admin triage: check capacity before permissions or hardware faults for this pattern.
Why C is correct
The directory accepted files minutes ago, so permissions are likely fine and capacity changed since. Df minus h immediately proves whether the filesystem hit one hundred percent use or inode limit. Other tools describe layout without answering space remaining for large saves.
Why the others are wrong
A. Pvdisplay details LVM physical extents, not filesystem free space.
B. Mount lists mounted devices without usage percentages.
D. Fdisk minus l shows partition tables, not current consumption.
SK0-005 exam tip
Large files suddenly fail on Linux always means df minus h first for space.
5Following a recent power outage, a server in the datacenter has been constantly going offline and losing its configuration. Users have been experiencing access
issues while using the application on the server. The server technician notices the date and time are incorrect when the server is online. All other servers are
working. Which of the following would MOST likely cause this issue? (Choose two.)
The server has a faulty power supply
The server has a CMOS battery failure
The server requires OS updates
The server has a malfunctioning LED panel
The servers do not have NTP configured
The time synchronization service is disabled on the servers
Answer: A, B
The short version
AB — Faulty supply plus dead CMOS battery explain loss. Power outage stress exposes a weak supply that drops under load while a dead battery loses clock and firmware settings. Both together cause offline plus reset behavior.
Key concepts in this question
Post-outage pattern: one server loses config and time while peers stay healthy points to local hardware.
CMOS battery role: keeps real-time clock and BIOS settings without mains power.
Power supply role: stable rails keep the board alive, weak units brown out and reboot.
OS and NTP distractors: updates or time sync cannot explain lost firmware config.
Why AB is correct
Incorrect date plus lost config after power loss is classic CMOS battery failure. Repeated offline under load after an outage implicates the supply that took surge stress. Together A plus B cover both symptoms while other servers prove the room and network are fine.
Why the others are wrong
C. Missing OS updates do not reset clocks or drop firmware config.
D. LED panel faults affect lights only, never power or timekeeping.
E. No NTP would drift time but never lose stored configuration.
F. Disabled sync service affects OS time, not BIOS retention or power stability.
SK0-005 exam tip
Lost time plus lost config after outage means CMOS battery, plus offline means supply.
6A company has implemented a requirement to encrypt all the hard drives on its servers as part of a data loss prevention strategy. Which of the following should
the company also perform as a data loss prevention method?
Encrypt all network traffic
Implement MFA on all the servers with encrypted data
Block the servers from using an encrypted USB
Implement port security on the switches
Answer: B
The short version
B — Add MFA on encrypted-data servers. Drive encryption stops offline reads, while MFA stops remote logon with stolen passwords. That layered control best extends loss prevention beyond media protection.
Key concepts in this question
Data loss prevention layers: media encryption plus identity assurance plus egress control.
Encrypted drives scope: protect at rest only, not network logons or credential replay.
MFA value: second factor blocks password-only access to servers holding sensitive volumes.
Network and USB options: useful hygiene but narrower than identity hardening for server access.
Why B is correct
With disks already encrypted, the remaining theft path is remote credential use. Requiring MFA on those servers ensures a password leak alone cannot expose decrypted data over the network. Other options either duplicate encryption or touch edge controls rather than server identity.
Why the others are wrong
A. Encrypting traffic helps transit but does not strengthen who may log on.
C. Blocking encrypted USB handles removable media, not server logon risk.
D. Switch port security guards plug-in points, not authenticated server access.
SK0-005 exam tip
Encrypted drives plus next DLP step almost always means implement MFA on those servers.
7A systems administrator is setting up a server on a LAN that uses an address space that follows the RFC 1918 standard. Which of the following IP addresses
should the administrator use to be in compliance with the standard?
11.251.196.241
171.245.198.241
172.16.19.241
193.168.145.241
Answer: C
The short version
C — 172 dot 16 dot 19 dot 241 is RFC 1918 private. The 172 dot 16 through 31 block is private, and dot 19 sits inside it. Other addresses fall in public or reserved space outside the standard.
172 dot 16 slash 12 range: second octet 16 through 31 inclusive counts as private space.
Lookalike traps: 11, 171 and 193 prefixes resemble private blocks but are public.
Compliance goal: pick an address routers never forward on the public internet by design.
Exam check: verify both first and second octets before selecting the private answer.
Why C is correct
Only 172 dot 16 dot 19 dot 241 lands inside a defined private range with second octet 19 between 16 and 31. The others use first octets or second octets outside all three private blocks. C is therefore the sole compliant LAN choice for the new server.
Why the others are wrong
A. 11 dot 251 is public space, not the 10 slash 8 private block.
B. 171 dot 245 is public and one digit away from the 172 private block.
D. 193 dot 168 is public and one digit away from 192 dot 168 private.
SK0-005 exam tip
Memorize 10 slash 8 plus 172 dot 16-31 plus 192 dot 168, then reject near-miss octets.
8An administrator needs to perform bare-metal maintenance on a server in a remote datacenter. Which of the following should the administrator use to access the
server's console?
IP KVM
VNC
A crash cart
RDP
SSH
Answer: A
The short version
A — IP KVM gives remote bare-metal console. An IP-connected KVM presents BIOS plus boot screens over the network even with no OS running. VNC, RDP and SSH need a running stack, crash cart needs physical presence.
Key concepts in this question
Bare-metal need: see POST, RAID and installer before any OS loads on the remote box.
IP KVM path: hardware digitizer plus out-of-band network reaches keyboard video mouse remotely.
OS-dependent tools: RDP, VNC and SSH attach after boot and fail during early maintenance.
Crash cart limit: local keyboard plus monitor cart cannot help a distant datacenter.
Remote workflow: IP KVM also supports virtual media for remote installer ISO mounting.
Why A is correct
Remote hardware work demands console below the OS over an independent management network. IP KVM provides exactly that remote keyboard video mouse plus power control. Other options either need the OS up or need hands on site to proceed.
Why the others are wrong
B. VNC needs an OS agent and network stack already running.
C. Crash cart is local only and useless for remote datacenter access.
D. RDP requires Windows booted with network logon available.
E. SSH gives text shell after boot, never BIOS or installer graphics.
SK0-005 exam tip
Remote plus bare-metal plus console always means IP KVM, not RDP or SSH.
9A technician needs to provide a VM with high availability. Which of the following actions should the technician take to complete this task as efficiently as possible?
Take a snapshot of the original VM
Clone the original VM
Convert the original VM to use dynamic disks
Perform a P2V of the original VM
Answer: B
The short version
B — Clone the VM for efficient high availability. Cloning copies the configured guest into a second instance that can run if the first fails. Snapshots, disk type changes and P2V do not create a runnable second host.
Key concepts in this question
High availability goal: a second ready VM to take load when the first is down.
Clone operation: full or linked copy of disks plus config as an independent guest.
Snapshot role: point-in-time rollback point, not a second running machine.
Linked versus full clone: linked saves space while full gives independent disks for failover.
Dynamic disks and P2V: storage format tweak and physical migration, neither adds redundancy.
Why B is correct
The fastest path to two runnable copies is duplicating the working VM definition and disks. A clone can power on alongside or instead of the original for continuity. Other actions improve recovery or format but leave only one runnable guest in place.
Why the others are wrong
A. Snapshot preserves rollback state but does not create a second host.
C. Dynamic disks save space but still reside in one VM.
D. P2V converts physical to virtual once, not VM to redundant VM.
SK0-005 exam tip
Need a second runnable VM fast always means clone, snapshot means rollback only.
10A server administrator receives a report that Ann, a new user, is unable to save a file to her home directory on a server. The administrator checks Ann's home
directory permissions and discovers the following:
dr-xr-xr-- /home/Ann
Which of the following commands should the administrator use to resolve the issue without granting unnecessary permissions?
chmod 777 /home/Ann
chmod 666 /home/Ann
chmod 711 /home/Ann
chmod 754 /home/Ann
Answer: D
The short version
D — Chmod 754 fixes write without excess rights. Owner needs full control, group needs read plus execute to traverse, others need read only. That restores Ann writes while avoiding wide-open permissions.
Key concepts in this question
Current mode dr-xr-xr: owner lacks write, group and other also lack write, so saves fail.
754 breakdown: 7 equals rwx for owner, 5 equals r-x for group, 4 equals r for other.
Least privilege fix: add owner write only, keep traversal for group, hide execute from other.
Numeric mapping: 4 read plus 2 write plus 1 execute explains each digit choice.
Overly broad modes: 777 or 666 grant far more than needed for a home directory.
Why D is correct
Ann needs owner write to create files in her own home, plus execute to traverse it. Mode 754 adds exactly owner write to the existing pattern while keeping group traverse and other read. It resolves the issue with no unnecessary write for group or other.
Why the others are wrong
A. 777 gives everyone full control and violates least privilege badly.
B. 666 gives read write but no execute, breaking directory traversal.
C. 711 gives owner full but strips group and other read needed for normal access.
SK0-005 exam tip
Home dir cannot save plus needs least fix means add owner write only, here 754.