10 free sample questions from a bank of 429, with the correct answers and explanations. No signup required — start practising right now.
1On a branch office deployment, it has been noted that if the FlexConnect AP is in standalone mode and loses connection to the WLC, all clients are disconnected, and the SSID is no longer advertised. Considering that FlexConnect local switching is enabled, which setting is causing this behavior?
ISE NAC is enabled
802.11r Fast Transition is enabled
Client Exclusion is enabled
FlexConnect Local Auth is disabled
Answer: A
2An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 security options are supported in this environment? (Choose two.)
Static WEP + 802.1X
WPA+WPA2
Static WEP
CKIP
802.1X
Answer:
3A customer wants to allow employees to easily onboard their personal devices to the wireless network. The visitors also must be able to connect to the same network without the need to engage with anyone from the reception desk. Which process must be configured on Cisco ISE to support this requirement?
MAC authentication bypass
native supplicant provisioning
local web auth
self-registration guest portal
Answer: D
4A customer has a distributed wireless deployment model where the WLCs are located in the data centers. Because the file servers are located in the data center, the traffic from the corporate WLAN Corp-401266017 must go through the controllers, where the guest WLAN Guest-19283746 traffic must use the local
Internet line installed in each office. Which configuration will accomplish this task?
Disable Local Switching for the corporate and guest WLAN.
Disable Local Switching for the corporate WLAN and enable it for the guest WLAN.
Enable Local Switching for the corporate and guest WLAN.
Enable Local Switching for the corporate WLAN and disable it for the guest WLAN.
Answer: B
5A network engineer is implementing BYOD on a wireless network. Based on the customer requirements, a dual SSID approach must be taken. Which two advanced WLAN configurations must be performed? (Choose two.)
Set NAC State to Radius NAC.
Set Allow AAA Override to Enabled.
Set DHCP Addr. Assignment to Required.
Select DHCP Profiling.
Select Enable Session Timeout.
Answer:
6Which three characteristics of a rogue AP pose a high security risk? (Choose three.)
open authentication
high RSSI
foreign SSID
accepts clients
low RSSI
distant location
Answer:
7Which AP model of the Cisco Aironet Active Sensor is used with Cisco DNA Center?
1800s
3600e
3800s
4800i
Answer: A
8Which component must be integrated with Cisco DNA Center to display the location of a client that is experiencing connectivity issues?
Cisco Hyperlocation Module
Wireless Intrusion Prevention System
Cisco Connected Mobile Experiences
Cisco Mobility Services Engine
Answer: C
9The IT manager is asking the wireless team to get a report for all guest user associations during the past two weeks. In which two formats can Cisco Prime save this report? (Choose two.)
CSV
PDF
XLS
DOC
plain text
Answer:
10A customer is experiencing performance issues with its wireless network and asks a wireless engineer to provide information about all sources of interference and their impacts to the wireless network over the past few days. Where can the requested information be accessed?
CleanAir reports on Cisco Prime Infrastructure
Performance reports on Cisco Prime Infrastructure
Interference Devices reports on Cisco Wireless LAN Controller
Air Quality reports on Cisco Wireless LAN Controller