300-101 — Free Practice Questions
10 free sample questions from a bank of 404, with the correct answers and explanations. No signup required — start practising right now.
1Which parameter in an SNMPv3 configuration offers authentication and encryption?
- auth
- noauth
- priv
- secret
Answer: C
2Which IPv6 address type is seen as the next-hop address in the output of the show ipv6 rip RIPng database command?
- link-local
- global
- site-local
- anycast
- multicast
Answer: A
3In IPv6, SLAAC provides the ability to address a host based on a network prefix that is advertised from a local network router. How is the prefix advertised?
- routing table
- router advertisements
- routing protocol
- routing type B
Answer:
4A network engineer is considering enabling load balancing with EIGRP. Which consideration should be analyzed?
- EIGRP allows a maximum of four paths across for load balancing traffic.
- By default, EIGRP uses a default variance of 2 for load balancing.
- EIGRP unequal path load balancing can result in routing loops.
- By default, EIGRP performs equal cost load balancing at least across four equal cost paths. D
Answer:
5Which statement is true?
- RADIUS uses TCP, and TACACS+ uses UDP.
- RADIUS encrypts the entire body of the packet.
- TACACS+ encrypts only the password portion of a packet.
- TACACS+ separates authentication and authorization. D
Answer:
6Which statement describes what this command accomplishes when inside and outside interfaces are correctly identified for NAT? ip nat inside source static tcp 192.168.1.50 80 209.165.201.1 8080 extendable
- It allows host 192.168.1.50 to access external websites using TCP port 8080.
- It allows external clients coming from public IP 209.165.201.1 to connect to a web server at 192.168.1.50.
- It allows external clients to connect to a web server hosted on 192.168.1.50.
- It represents an incorrect NAT configuration because it uses standard TCP ports.
Answer: C
7In which two ways can NetFlow data be viewed? (Choose two.)
- CLI
- NetFlow
- built-in GUI
- syslog server interface
- web interface AB
Answer:
8Other than a working EIGRP configuration, which option must be the same on all routers for EIGRP authentication key role over to work correctly?
- SMTP
- SNMP
- passwords
- time D
Answer:
9Refer to the exhibit. A network engineer is troubleshooting a DMVPN setup between the hub and the spoke. The engineer executes the command show crypto isakmp sa and observes the output that is displayed. What is the problem?
- that ISAKMP is using default settings
- an incompatible ISAKMP policy
- an incompatible IPsec transform set
- that ISAKMP is not enabled
Answer: A
10A network administrator notices that the BGP state and logs are generated for missing BGP hello keepalives. What is the potential problem?
- hello timer mismatch
- MTU mismatch
- incorrect neighbor options
- BGP path MTU enabled
Answer: B
Want the full bank of 404 questions for 300-101? See all practice exams.