Sign In
Home/VMware/2V0-41.19/Free questions

2V0-41.19 — Free Practice Questions

10 free sample questions from a bank of 89, with the correct answers and explanations. No signup required — start practising right now.

1Which two commands are used to query the arp-table of a logical switch? (Choose two.)
  • get logical-switch arp-table
  • get logical-switch arp-table
  • get logical-switch arp-table
  • get logical-switch arp-table
  • get logical-switch arp-table
Answer:
2What are the supported N-VDS modes?
  • DPDK Datapath
  • Enhanced Datapath
  • Overlay Datapath
  • Standard Datapath
  • Secure Datapath
Answer:
3An organization with two data centers is planning an active-active multi-site deployment of NSX-T Data Center. The two data centers have this network connectivity configuration: ✑ Redundant 1Gbps links with 200 millisecond RTT ✑ Global load balancing is not being utilized ✑ 1600 MTU ✑ vSphere 6.5U2 Which configuration prevents the use of an active-active architecture?
  • vSphere 6.7 is the minimum supported version for active-active on vSphere
  • 9000 MTU is required for active-active state replication
  • global load-balancing is required to support NSX Manager DNS namespace
  • RTT must be under 150 ms
Answer: D
4An NSX administrator has created a segment named WEB-LS from the simplified UI and noticed the segment is not realized on the KVM Transport node. What are two possible causes for this issue? (Choose two.)
  • Since the Compute Manager is disconnected in Simplified UI, the WEB-LS segment will not be realized on the KVM Transport Node.
  • The virtual machines running on the KVM Transport Node are connected to the WEB-LS segment, but are in Powered Off state.
  • The virtual machines running on the KVM Transport Node are not connected to the VDS.
  • The KVM Transport node has hardware issues and will not realize the WEB-LS Segment.
  • The virtual machines running on the KVM transport node are not connected to the WEB-LS Segment.
Answer:
5Which NSX CLI command will enable the SSH service on the NSX Edge node?
  • set service ssh enabled
  • start service ssh
  • start service ssh start-on-boot
  • set service ssh start-on-boot enabled
Answer: D
6An NSX administrator is configuring the KVM hypervisor host as a transport node and wants to apply the Failover Order as a NIC teaming policy. Which profile allows the administrator to configure the NIC Teaming policy as Failover Order?
  • N-VDS Profile
  • Uplink Profile
  • Host Switch Profile
  • Transport Node Profile
Answer: B
7In an enterprise-based single-tier routing topology, which routing component provides east-west routing functionality?
  • Tier-0 Gateway
  • Edge Node
  • Edge Cluster
  • Tier-1 Gateway
Answer: B
8An NSX administrator is planning to deploy a multi-tier routing topology in their NSX-T Data Center environment to provide East-West routing for the VMs. Which routing component must be deployed?
  • Tier-0 Gateway
  • Edge Cluster
  • Tier-1 Gateway
  • Edge Node
Answer: A
9A NSX-T Data Center administrator wants to ensure that any machine on a public network can communicate with a Web VM running in a NSX-T Data Center environment. Which NAT type must be created on the Tier-0 or Tier-1 Gateway to achieve this?
2V0-41.19 question 9
  • 1:1 NAT
  • Reverse NAT
  • DNAT
  • SNAT
Answer: C
10An NSX administrator created a Segment from the Simplified UI and wants to find the Replication Mode configured on the Segment. Which NSX CLI command lists the Replication mode?
  • get logical-switches
  • get logical-switch
  • get logical-switch status
  • get logical-switch status
Answer: B
Unlock all 89 questions · $9.99Practice these interactively

Want the full bank of 89 questions for 2V0-41.19? See all practice exams.